Contact: [email protected] — we usually reply within a few days. Please include your iPhone model, iOS version, car model and year, and what you were doing when the problem happened.
What you need
- A BMW F or G series (2010 and newer). MINI is not supported yet.
- A vLinker MC+ Bluetooth OBD adapter. Other adapters are not supported yet.
- Ignition on. The engine does not have to run.
How to connect
-
Plug the adapter into the OBD port under the dashboard on the driver's side.
-
Turn on the ignition.
-
Open BimmerCheck, tap Find adapter and choose the vLinker. Next time the app offers to connect to it with one tap.
The adapter is not found
- Check that Bluetooth is on and the app is allowed to use it: Settings → BimmerCheck → Bluetooth.
- Do not pair the adapter in iOS Settings — the app connects to it directly.
- Unplug the adapter for a few seconds and plug it back in.
The car does not respond
- Turn the ignition on (not just accessory mode) and try again.
- The first fault scan of a new car looks for all its modules and can take up to 1.5 minutes. Later scans are faster.
- If the battery voltage is low, charge the battery: modules may stop answering.
Is it safe?
The app only reads data. The single thing it writes is clearing fault codes, and only after you confirm. Coding is not supported.
A description is wrong